Hydraulic C-frame press

Hydraulic C-press with C-frame is used for the operation of stamping and drawing of metal for the production of various forms. Also suitable for processing non-metallic materials and products of the metal powder.
This machine is equipped with a lower and upper table with T-slot grooves and a two-speed motorized hydraulic unit. In addition, this machine is equipped with two piston conductors. This C-frame press is powered by electromagnetic valves, such as a non-return valve, an overpressure valve and a decompression valve for the cylinder. The anti-rotation cylinder is standard built-in. Thanks to the switches on the side of the machine, the cylinder stroke can be easily adjusted. This hydraulic C-frame press has an electrical control panel with a manual or automatic control switch and a switch for two different cylinder speeds.

Properties:
Easy to operate
Steel construction welded frame
Ability to stop at any position
Manometer
Relief valve for overload
Stroke, stepless adjustment
T-slot top and bottom table
Two guide piston both side
Safety barrier
Two hand control
Article number Type Pressure force Table dimensions Pressure max. Return speed Down feed Max. stroke Operating speed Oil tank Length b h Weight Gross price
(excl. VAT)
For Unit Min. o.q. 
23440 HU 30 HCP 300 kN 450 x 700 mm 244 bar 90 mm/sec 54 mm/sec 200 mm 18 mm/sec 150 lt 1680 mm 850 mm 2250 mm 2950 kg
23441 HU 60 HCP 600 kN 500 x 750 mm 236 bar 47 mm/sec 26 mm/sec 250 mm 8,5 mm/sec 200 lt 1820 mm 960 mm 2400 mm 4000 kg
23442 HU 100 HCP 1000 kN 600 x 1100 mm 263 bar 37 mm/sec 17,5 mm/sec 300 mm 5,5 mm/sec 300 lt 1850 mm 1400 mm 2650 mm 5400 kg
23443 HU 150 HCP 1500 kN 700 x 1100 mm 244 bar 22 mm/sec 10 mm/sec 300 mm 3,5 mm/sec 340 lt 2300 mm 1400 mm 2750 mm 7700 kg