Lathe machine 250x550 mm with digital readout, inverter and AC motor
LTC DR 550I Vario-2 SINO
€3,152.29
€2,605.20
Temporarily sold out
Item number
15433
Model
LTC DR 550I Vario-2 SINO
EAN
8718242560108
Metal lathe, LTC DR 550i is equipped with a speed display and stepless speed,
Inverter and AC motor (much more powerful than DC motor, and less susceptible to interference).
With induction hardened and ground prism bed.
CE equipped.
Metal lathe comes standard with:
Three jaw 125mm
Four jaws 125mm
Chip tray and rear shield
Long feed
Cross feed
4-turn chisel holder
Fixed and movable goggles
LED lighting
Separate emergency stop
Accessory box with change wheels, fixed centers, oil sprayer etc.
RAL 5018 & RAL 7004
Optional:
Chassis
Quick change tool holder
Inverter and AC motor (much more powerful than DC motor, and less susceptible to interference).
With induction hardened and ground prism bed.
CE equipped.
Metal lathe comes standard with:
Three jaw 125mm
Four jaws 125mm
Chip tray and rear shield
Long feed
Cross feed
4-turn chisel holder
Fixed and movable goggles
LED lighting
Separate emergency stop
Accessory box with change wheels, fixed centers, oil sprayer etc.
RAL 5018 & RAL 7004
Optional:
Chassis
Quick change tool holder
| Swing over bed | 250 mm |
| Distance between centres | 550 mm |
| Hole through spindle | 26 mm |
| Engine power | 1,5 kW |
| Digital readout | yes |
| Tail stock taper | MT2 |
| Tailstock spindle travel | 80 mm |
| Threading metric | 0,2-3,5 mm |
| Threading whitworth | 8-56 TPI |
| Swing over cross slide | 150 mm |
| Cross travel support | 135 mm |
| Speed range | 30-2200 rpm |
| Top slide travel | 80 mm |
| Longitudinal feed | 0,06-0,32 mm/rev |
| Voltage | 230 V |
| Machine dimensions | 115 x 65 x 75 cm |
| Weight | 145 kg |
| Taper of main spindle | MT4 |
| Packaging dimensions | 125 x 63 x 61 cm |
| Item number | 15433 | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | LTC DR 550I Vario-2 SINO | ||||||||||||||||||||||||||||||||||||||
| EAN | 8718242560108 | ||||||||||||||||||||||||||||||||||||||
| CBS Statistics number | 84581900 | ||||||||||||||||||||||||||||||||||||||
| Article group | HUVEMA Webshop Machines & Equipment | ||||||||||||||||||||||||||||||||||||||
| Brand | Huvema | ||||||||||||||||||||||||||||||||||||||
| Features |
|
||||||||||||||||||||||||||||||||||||||
| Article group code | 1805324 |
Accessory options
Select one or more accessories to order or
Spare parts for this item
-
Switch (on/off)€36.66 €30.30 -
Potentiometer (speed)€36.66 €30.30 -
Revolution counter€122.09 €100.90 -
Switch€48.40 €40.00 -
Part HU 315 CS, drain plug no. 421€9.44 €7.80 -
Keyless bush of wheels€16.21 €13.40 -
Inverter lathe€554.18 €458.00 -
Shaft (6-sided)€8.35 €6.90 -
Drive belt€15.13 €12.50 -
Drive belt€15.13 €12.50 -
Distance bus€6.05 €5.00 -
Emergency stop€33.28 €27.50 -
Switch L/R€45.38 €37.50 -
Sliding ring€6.35 €5.25 -
Sliding ring€6.35 €5.25 -
Spindle+nut cross support€82.28 €68.00 -
Rack and pinion€62.92 €52.00 -
Gear shaft€43.56 €36.00 -
T-nut€8.47 €7.00 -
Connection cable for Sino digital readout€19.30 €15.95
