Bench drill - 16 mm - 230V

This V-belt driven drill is designed for drilling in all common materials from aluminum, non-ferrous metals to high-strength steels, wood and plastic. The vertically sliding table has slots for vice mounting and can be tilted up to 45° to either side according to the scale. The MK2 drill spindle is mounted in ball bearings and the machine is equipped with a variable speed. The drilling depth can be adjusted using a scale stop. This machine is particularly suitable for use in repair and maintenance workshops and for do-it-yourselfers.

Features

• Powerful motor

• Variable speed
• Large drill chuck with keyway for precise drilling with small to large drill bits
• Adjustable depth stop ideal for repetitive drilling
• 3-way lever for excellent control while drilling
• Heavy duty cast iron base
• Machined cast iron table with slots for attaching clamps, vises etc.
• < li>Tilt table, which can easily be moved up or down the column for best positioning
• Thick, metal column for strong, sturdy support
• On/off push button switch on the front with removable safety tab for extra safety

Recommended speeds for a 10mm HSS drill:

• Aluminium: 1500 rpm
• li>
• Brass: 1500 rpm
• Cast iron: 1000 rpm
• Mild steel: 800 rpm
• Carbon steel: 600 rpm min
• Stainless steel: 300 rpm
• Wood: 2000 rpm
• Plastic: 1500 rpm

About In general, the smaller the drill, the higher the required speed. Wood requires higher speeds than metal.
Metal is usually drilled at lower speeds; if necessary, cutting oil is used.

The drill is delivered partially disassembled